An alkyd based undercoat for use as a primer on steel, wood or plaster, to be applied by brush or roller and over coated with brushing enamel.
DRYING TIME: SURFACE: 90 MINUTES HARD: 5 – 7 HOURS OVERCOATING TIME: MIN. 6 HOURS AT 25°C APPLICATION METHOD: BRUSH, ROLLER OR SPRAY FINENESS OF GRIND: 5 – 10 MICRONS COVERAGE AT DFT 30 MICRONS: 6 SQUARE METRES PER LITRE ON NON-POROUS SUBSTRATE
DESCRIPTION & GENERAL USE: A high quality alkyd-based undercoat for use on metal, wood, plaster, cement or masonry where the intended topcoat is an alkyd-based enamel. Wood and metal must be sealed or primed with the appropriate sealer or primer before the undercoat is applied. Cement and plaster should be sealed with Supreme Bonding Liquid before applying the undercoat. NOTE: If the undercoat is to be sprayed, it must be thinned to 18-20” Ford Cup 4 with turps or enamel thinners. Do not use lacquer thinners for this purpose. All equipment must be cleaned after use with turps or enamel thinners.