ULTRA HIGH HEAT is a superior rust-preventive enamel that provides deep color, rich sheen and the best protection for high heat surfaces. This durable semi-gloss finish gives metal surfaces a premium look along with excellent gloss and color retention after repeated heating. It withstands temperatures of up to 1200 degrees (648C). Ideal for barbeque grills, wood stoves, radiators, firepits, fireplace screens, automotive parts and more.
- Indoor/outdoor
- Rich, semi-gloss sheen
- Superior color and sheen retention after repeated heating
FOR BEST RESULTS
Do not use in areas directly exposed to flames (e.g., inside of grills or fireplaces).
Practical Coverage: | Brush 9.5 m² / Spray 0.8 m² |
|||||
Dry Times: | ||||||
Touch | Spray - 30 min / Brush 2 - 4 hour | |||||
Handle | Spray 1 - 2 hours / Brush 5-9 hour | |||||
Recoat | Spray within 1 hour of first coat otherwise after 48 hours / Brush after 9 hours | |||||
Shelf Life: | 5 years | |||||
Application: | Sprays: Shake often during use. Hold can upright 10-16” from surface and spray in a steady back-and-forth motion, slightly overlapping each stroke. Keep the can the same distance from the surface. Keep the can in motion while spraying. Apply two or more light coats a few minutes apart to avoid drips and runs. Do not use near open flame.........................................................................................................Brush Goods: Mix thoroughly to ensure any settled pigment is re-dispersed. Thin material only if necessary with mineral spirits. For brush or roller application, thin no more than 5%. Do not thin with gasoline, lacquer thinner, turpentine, etc. Apply with a good quality brush, nap roller, or conventional spray gun. A second coat is not recommended |
|||||
Substrates / Surfaces: | Ideal for the exterior of barbeque grills, wood stoves, radiators, fire pits, fireplace screens, automotive parts | |||||
Clean Up: | Sprays: Dries to touch in 30 minutes and to handle in 1-2 hours. Allow paint to dry for 1 hour before heating. In order to achieve full cure, the coating must be heat cured at 450ºF for one hour. Product may emit smoke and harmless odor.............................................................. Brush Goods: Dries to touch in 2-4 hours, to handle in 5-9 hours, and is fully dry in 24 hours. Allow paint to dry 24 hours before heating. When using the subject surface for the first time, open windows and provide ventilation as the new paint finish may emit smoke. |