ABOUT M1400 WATER-BASED CONSTRUCTION MARKING PAINT
Create bold, durable lines with Rust-Oleum Industrial Choice® Construction Marking Paint. This water-based formula is especially designed for the rigorous demands of construction, excavation, surveying, landscaping and other commercial operations.
- Best resistance to early fading and chalking; dries fast
- Marks more linear feet than the leading competitor
- Excellent visibility on concrete, pavement, dirt, gravel, grass and more
- Easy to apply—no messy tip adjustments, non-clogging, locking spray tip won’t pop off
For Best Results
- Apply using the Marking Pistol or Marking Wand
SURFACE PREPARATION
ALL SURFACES: Remove loose contaminants by sweeping
the surface before application of the coating.
APPLICATION
Use when temperature is 40-90°F (10-32°C) and humidity is
below 85% to ensure proper drying. This product can be
used down to 25°F (-4°C) which may result in a slight
reduction of delivery rate. Protect surrounding surfaces from
overspray. Overspray can carry a significant distance. Shake
can vigorously for one minute after mixing ball is heard. Hold
can 4 to 10 inches from surface to be marked. Press spray
tip sideways to spray or use Rust-Oleum Marking Wand
#2393000 or Marking Pistol #210188. Follow directions for
proper use of this equipment. Keep can moving to prevent
build-up.
DRY & RECOAT TIMES
Dry and recoat times are based on 70°F and 50% relative
humidity. This product dries in less than 5 minutes.
CLEAN-UP
Wipe off spray tip when finished using. Properly discard
empty container. Do not burn or place in trash compactor.
Empty container can be recycled.