Woodgard Rubbol is a penetrating wood dressing for the protection of all exterior wooden surfaces only.
May be used on all exterior wooden surfaces such as windows, doors, barge boards, etc. where a durable water repellent dressing is required.
Finish Low Sheen
Coverage ≈ 10 m²/L
Drying Time Dependent upon temperature and humidity.
Woodgard Rubbol is a penetrating wood dressing for the protection of all exterior wooden surfaces only
Brush or conventional spray.
Health & safety
"Ensure that surfaces are sound and free from dust, dirt, grease and oil. Surfaces must be thoroughly dry - no more than 12% moisture content. Do not apply during cold (below 10°C) or wet weather. Do not apply directly to bare metal surfaces – stop nail holes with wood filler. Do not apply to wet or damp timber. Do not attempt to apply so thickly as to form a film – this may blister, blanch or peel off. It is important to treat the end grain of timber to prevent moisture ingress. It is important to adhere strictly to Application Methods, and to allow adequate drying between coats. N.B. WOODGARD RUBBOL is not recommended for floors or decking."