Can be applied on walls, floors and suitably primed metal surfaces.
FEATURES AND BENEFITS
Good resistance to a wide range of chemicals and most solvents.
Cures to a hard film with good adhesion and abrasion resistance.
Provides an economical alternative to tiling in bathrooms, showers,
kitchens, toilets and low cost housing.
Suitable for surfaces that require frequent cleaning with solvents,
detergents or alkaline cleaners.
The cured film is non-toxic. When properly applied and cured, the
product is completely safe for direct or accidental food contact, and can
safely be used on children’s toys and on equipment and working spaces
in the food and dairy industry.
Colour White, Light Grey, Dark Grey and Brilliant Green
Density at 23°C Approx. : 1.30 kg/L
Solids Content By weight : Approx. 60%
By volume : Approx. 44%
Packaged Viscosity Viscosity at 23°C : Approx 70 KU
Recommended film 35µm dry; 76 to 102µm wet
thickness (more for increased resistance)
Spreading rate Brush approx 9.3m per litre
at 35µm DFT Spray approx 6.8m per litre
Application Surface Temperature between 10 - 35°C
conditions Relative Humidity between 10 - 85 %
Mixing Ratio 4 parts Base to 1 part Curing Agent by volume
Approx 84 base to 16 Curing Agent by mass
Thinner Dulux Trade Hd Thinner
Induction Period 30 minutes at 25°C
(i.e. do not paint immediately after mixing)
Pot Life to gelation Approx 8 hours at 25°C
Dry to handle 24 hours at 25°C
Recoating Time 6 hours minimum;
up to 7 days maximum at 25°C
Cleaning of For clean up use Dulux Trade Hd Thinner
Substrates Suitable for cement plaster, concrete and
Precautions Ensure that surfaces are sound and free from dust,
dirt, grease and oil. Surfaces must be thoroughly
dry - no more than 12% moisture content.
Do not apply during cold (below 10°C) or wet weather