For direct application to new, but dry cement or concrete floors.
May be applied to previously painted or old cement surfaces, provided
the surface is clean, sound and free from wax polish.
May be used for decorating interior and exterior windowsills, and has
been successfully used on palisade fencing.
FEATURES AND BENEFITS
Quick drying finish.
Alkali resistant fast colours.
Hard wearing and easy to clean.
Easy to re-paint when recoating becomes necessary.
Prevents disintegration of cement floors.
Colour Red Oxide, Dark Sea Grey, Black,
Chrome Oxide Green, Brilliant Green
Density at 23°C Approx. : 0.99 kg/L
Solids Content By weight : Approx. 55%
By volume : Approx. 40%
Packaged Viscosity Viscosity at 23°C : Approx 70 KU
Spreading Rate Approx 10m2
per litre depending on surface
porosity, profile and application method
Recommended Min. 35µm. Max. 45µm.
DFT per coat
Application Surface Temperature between 10°C - 35°C
conditions Relative Humidity between 10 % - 85 %
Application Brush, Roller mohair or closed foam type roller
Thinner Thinning not recommended
Ready for use after thorough stirring
Drying Time Surface dry 4 hours
(Drying times will be extended during cold,
wet or humid conditions)
Recoating Time 18 hours (overnight)
Cleaning of For clean up use Dulux Brush Cleaner/
equipment Degreaser or Mineral Turpentine
Substrates Suitable for cement plaster and concrete floors
Ensure that surfaces are sound and free from dust,
dirt, grease and oil. Surfaces must be thoroughly dry
- no more than 12% moisture content.
Do not apply during cold (below 10°C) or wet weather.
Do not apply directly to bare metal surfaces.
Not suitable for direct application to powdery or
friable surfaces whether previously painted or not.
Apply two to three finishing coats to surfaces to
achieve a closed film and solid colour.