Dulux Trade Bonding Liquid

Dulux Trade Bonding Liquid

Regular price
R 355.00
Sale price
R 355.00

PRODUCT USES
Recommended as a penetrating primer or sealer for new dry interior
and exterior porous surfaces such as gypsum plaster, brick, concrete,
cement, “Masonite” hardboard (interior only) and various other types of
composition boarding. Normally used when top coated with filler coats
and Eggshell or Gloss Enamel paints.
Suitable as a primer/bonding liquid for penetrating and binding unsound
PVA or lime wash to the original surface. It may be used on interior and
exterior plaster.

FEATURES AND BENEFITS
For interior and exterior use. One Product convenience.
Contains high quality resin. The best possible penetration and bonding
of powdery surfaces - ensures surfaces are properly prepared for
subsequent topcoats - thus prolonging life span of the
total paint system.
Excellent alkali resistance so that it can be used on new plaster.
Easy to apply with brush or roller.
Can be overcoated with water and solvent based topcoats.


PRODUCT INFORMATION
Colour Clear
Density at 23°C Approx. : 0.80 kg/L
Solids Content By weight : Approx. 19%
By volume : Approx. 15%
Spreading Rate Approx 12m2
per litre depending on surface
porosity, profile and application method
Recommended Penetrates substrate
DFT per coat


APPLICATION INFORMATION
Application Surface Temperature between 10°C - 35°C
conditions Relative Humidity between 10 % - 85 %
Application Brush, roller or spray application
methods Brush preferred to ensure penetration
Thinner Thinning not recommended
Ready for use after thorough stirring
Drying Time Touch dry 2 hours
(Drying times will be extended during cold,
wet or humid conditions)
Recoating Time It should be overcoated within 18 to 24 hours
4 hours minimum; 24 hours maximum
Cleaning of For clean up use Dulux Brush Cleaner/
equipment Degreaser or Mineral Turpentine
Substrates Suitable for cement plaster, gypsum plaster,
concrete, fibre cement and all
composition boarding.
Sealer for
penetrating
and bonding
powdery
surfaces

APPLICATION INFORMATION
Precautions
Ensure that surfaces are sound and free from dust,
dirt, and debris. Remove whatever powdery residues
can be brushed off with a stiff brush. Surfaces
must be thoroughly dry - no more than 12%
moisture content.
Do not apply during cold (below 10°C) or
wet weather.
Not suitable for direct application to powdery or
friable surfaces whether previously painted or not.
Not suitable as a primer for metal surfaces.
Surfaces must be completely dry before applying
this material.
It should be over coated within 18 to 24 hours.
Coats Required
Can be over coated with most Dulux
decorative finishes.
SURFACE PREPARATION

Click to edit the product in Ali Orders.
Note: only show for shop owner