Dulux Supergrip All-Surface Primer is a Versatile Multi-Surface Waterborne primer
· Suitable for use as a primer to appropriately prepared interior and exterior surfaces as
specified under substrates to provide a good base for over coating with most Dulux
FEATURES AND BENEFITS
· Water-based – easy clean-up of brushes and rollers.
· Extreme adhesion – from walls to ceramic tiles.
· Quick drying – can be overcoated on the same day.
· Low Odour – rapid room re-entry, no strong solvent fumes to worry about.
· High opacity – can lessen the number of topcoats over dark substrates.
Appearance Mid Sheen
Binder Type Pure Acrylic
Density at 23°C Approx. 1.27
Solids Content By weight: Approx. 49%
By volume: Approx. 37%
Packaged Viscosity Viscosity at 23°C: Approx. 95 KU pp
Spreading Rate Approx. 12 m² per litre depending on surface porosity, profile
and application method
Recommended DFT per coat Min. 25µm. Max. 35µm
Recommended WFT per coat Min. 70µm. Max. 95µm
Flash Point Non-Flammable
Mixing Stir with a flat paddle until homogeneous.
Application conditions Surface Temperature between 10 - 35°C Relative Humidity
between 10 - 85 % OR 2ºC above dew point minimum.
Application methods Brush or roller. Can be sprayed using airless spraying
equipment without thinning
Thinner Thinning not recommended.
Ready for use after thorough stirring for brush or roller
applications. Water if required for spraying to maximum of 5
- 10% of product volume.
Drying Time Touch dry 2 hours at 23ºC.
Recoating Time 12 hours at 23ºC. Allow 48 hours drying time for solventbased
topcoats. (Drying times will be extended during cold,
wet or humid conditions)
Cleaning of equipment After use, remove as much product as possible, and then
clean immediately with water.
Substrates Suitable for PVC gutters and down pipes, previously painted
enamel surfaces, wood, ceramic tiles, new concrete, cement
plaster, Melamine/Formica®, glass, galvanised iron.
Precautions: Do not apply during cold (below 10°C) or wet weather.
Not suitable as a primer for metal or rhinolite surfaces.
Not suitable for direct application to powdery or friable
surfaces whether previously painted or not.
Do not overcoated with two-pack polyurethanes, epoxies
and nitro-cellulose lacquers.
Not designed to withstand natural weathering. It should be
over-coated within 48 hours, particularly in a marine
Coats Required Apply one or two coats Dulux Supergrip, depending on the
severity of the conditions. Two coats are preferred for spray
Top Coating Can be over-coated with most Dulux decorative finishes.